Feed-N-Wax Wood Polish and Conditioner, 16-Oz

Feed-N-Wax is a wood care product that polishes all wood surfaces to a soft luster with a protective coating of Carnauba Wax and Beeswax. It introduces conditioning oils that "feed" the wood and help keep it from drying and fading, enhancing the natural beauty and depth of grain in finished and unfinished wood.

Suitable for use on a variety of wood surfaces, including antiques, dining tables, kitchen cabinets, wood doors and trim, Feed-N-Wax helps prevent further drying of the wood and deterioration of the finish. Importantly, it contains no silicone or linseed oils. The product serves as the perfect follow-up to Restor-A-Finish, helping to maintain the newly restored wood finish.

To use, ensure the surface is free from dust and dirt. Saturate a small soft cloth with Feed-N-Wax and wipe it evenly onto the wood surface. Allow the product to stand for at least 20 minutes before wiping off any excess. Then, polish the surface with a clean soft cloth. On unfinished wood surfaces, more coats and longer drying time (preferably overnight) may be necessary.

Always test the product in an inconspicuous area to check the results before applying it to the entire wood surface. Do not mix Feed-N-Wax with other chemicals. Wear impervious gloves and safety glasses when using the product, and keep it out of the reach of children.

The primary active ingredient in Feed-N-Wax is Hydrogenated Mineral Oil. If the product is swallowed, immediately call a physician or poison control center and do not induce vomiting. If it gets in the eyes, rinse them with water for 15 minutes. If it comes into contact with skin, rinse the affected area well with soap and water.

For storage, keep the product in a cool place and ensure the cap is closed. The included components for this wood care product are Power Wood Lathes, which facilitate the application and polishing of the Feed-N-Wax on various wood surfaces.

product information: